Set values Set values| With
this function block the addresses connected at the outputs
can be changed. Addresses must be connected at the
outputs; internal connections are not possible. The function is similar to Send value from the address window. With this function block the control elements can additionally be freely arranged on the page, for example to set setpoints/actual values during testing. The addresses are only changed when a control element has been operated. For each output an input field, a slider and the buttons 0, 1, 1/0 (pushbutton: 1 while pressed, otherwise 0) and -> (send current value) are available. |
Outputs |
||
| A1-Ax |
Output |
At each output the set value is output to the
connected address. The number of outputs is defined via the
parameter Number of outputs. |
Parameters |
||
| Number of outputs |
Number of outputs (1 to 32). |
|
| Minimum / Maximum |
Minimum / maximum value for the slider. |
|
Operation: Addresses can be dragged from the address window by drag & drop directly onto a row of the element or into the address table. When the parameter Number of outputs is changed, the address table updates automatically.